Changes

:Tap to open/close the currently selected systems sub-menu.:Keep the button pressed and move up/down to select different systems sub-menu(SYSTEMS, ENGINES, FUEL).<br/>

:'''WP HUD''' - switch waypoints display WayPoints labels on/off

:'''AC HUD''' - switch other airplane marker display AirCraft labels on/off

:'''COMMS HUD''' - switch COMMS text display texts on/off

:'''APU''' - AUXILIARY POWER UNIT: switch APU on/off

:'''ENG xN1 xx%''' - Tap once to start up the engine, ready when green is ready; tap again to switch it off. Shows throttle power Displays N1 (Low pressure compressor rotational speed) for selected each engine.

:'''THR xx%''' - Move up/down to adjust engines thrust separately.

:'''FUEL''' - move Move left/right to move fuel from one tank to the other

Keep the button pressed and move up/down to move between the different change flaps settings, release to set the desired setting.

Press to extend /retract the landing gear. Make sure to have an Air-Speed IAS (Indicated Airspeed) below "VLO" (Maximum landing gear operating speed) in order to extend it.

Keep the button pressed and move up/down to move between the different spoiler change spoilers settings, release to set the desired setting.

Switch Tap to switch on/off the Ground Brakeground brake.

Move left/right to operate the Rudderrudder.

Press Tap to switch multiple panel configuration.<br/>Keep the button pressed for 1 second and move up/down to quickly choose change the desired panel.<br/>Keep pressed on single instrument for 1 second and move up/down/left/right to customize each one.

Press Tap to switch multiple camera views.<br/>Keep the button pressed for 1 second and move up/down/left/right to quickly choose the desired camera view.<br/>

Choose any set of data to display for each available data area.<br/>Keep the data area indicator pressed and move up/down or /left/right to change the desired display, release to set the desired settingindicator type.<br/>

<div id="anchor14">'''14. Planner Flight Plan MAP/FMC'''</div>

'''FMC'''- openFlight Management Computer: Open/close FMC panel.<br/>'''CENTER'''- center Center the map view on your airplane.<br/>

'''RMV''' - select REMOVE: Select a waypoint from the list and press RMV to remove it.<br/>'''NXT''' - select NEXT: Select a waypoint from the list and press NXT to make it the next active waypoint.<br/>'''UP''' - select UP: Select a waypoint from the list and press UP to move it to the upper position.<br/>'''DWN''' - select DOWN: Select a waypoint from the list and press DOWN to move it to the lover lower position.<br/>'''CLR''' - clear CLEAR: Clear all waypoints.<br/>'''DEP''' - active DEPARTURE: Active only if a HD departure airport exists in your flight plan. Press DEP to open the SID list, then choose a SID and press SELECT to activate it.<br/>'''ARR''' - active ARRIVAL: Active only if an HD arrival airport exists in your flight plan. Press ARR to open the STAR list, then choose a STAR and press SELECT to activate it.<br/>'''APP''' - active APPROACH: Active only if an arrival airport exists in your flight plan. Press APP to open the APPROACH list, then choose an APPROACH and press SELECT, then choose the TRANSITION (only HD airport) and press SELECT to activate it.<br/>